|
Product Details:
|
| Material: | Aluminum | Price: | Negotiable |
|---|---|---|---|
| Color: | Silver | Structure: | Piston Cylinder |
| Power: | Pneumatic | Stroke: | 10-300mm |
| Showroom Location: | None | Product Name: | Compact Guide Cylinder |
| Standard Or Nonstandard: | Standanrd | ||
| High Light: | 10mm Pneumatic Air Cylinder,300mm Pneumatic Air Cylinder,Compact Air Cylinder MGP Series |
||
| Model | Bore size |
Port size |
Standard stroke mm | Max.theoretical force | Piston port size | Available accessories | Mode | Maxoperating pressure |
| MGPM12 | 12 | M5 | 5〜50 | 10Kgf | M3X0.5,M5X0.8 | D-Z73 | MGP: | 0^10/kgf/cm2 |
| MGPM16 | 16 | M5 | 5〜50 | 14Kgf | M3X0.5,M5X0.8 | |||
| MGPM20 | 20 | M5 | 5〜50 | 28Kgf | M4X0.7.M6X1 | |||
| MGPM25 | 25 | M5 | 5~50 | 44Kgf | M5X0.8.M8X1.25 | |||
| MGPM32 | 32 | PT1/8 | 5-500 | 70Kgf | M6X1.M10X1.25 | |||
| MGPM40 | 40 | PT1/8 | 5 〜500 | 110Kgf | M8X1.25.M14X1.5 | |||
| MGPM50 | 50 | PT1/4 | 5-500 | 170Kgf | M10X1.5.M18X1.5 | |||
| MGPM63 | 63 | PT1/4 | 5-500 | 280Kgf | M10X1.5.M18X1.5 |
Delivery
1. If the products we have in stock, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time,
and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNT will be normal ways. If you require use of a courier,
we can do it.MGPM12 Series Replace SMC MGP Compact Guide Cylinder
Caution
1. The compatibility of the product is the responsibility of the person who designs the equipment or decides its specifications.
Since the product specified here is used under various operating conditions, its compatibility with specific equipment must be decided by the person who designs the equipment or decides its specifications based on necessary analysis and test results. The expected performance and safety assurance of the equipment will be the responsibility of the person who has determined its compatibility with the product. This person should also continuously review all specifications of the product referring to its latest catalog information, with a view to giving due consideration to any possibility of equipment failure when configuring the equipment.
2. Use cylinders within the piston speed range.
An orifi ce is set for this cylinder, but the piston speed may exceed the operating range if the speed controller is not used. If the cylinder is used outside the operating speed range, it may cause damage to the cylinder and shorten the service life. Adjust the speed by installing the speed controller and use the cylinder within the limited range.
3. Pay attention to the operating speed when the product is mounted vertically.
When using the product in the vertical direction, if the load factor is large, the operating speed can be faster than the control speed of the speed controller (i.e. quick extension). In such cases, it is recommended to use a dual speed controller.
4. Do not scratch or gouge the sliding portion of the piston rod and the guide rod.
5. Only personnel with appropriate training should operate machinery and equipment.
The product specified here may become unsafe if handled incorrectly. The assembly, operation and maintenance of machines or equipment including our products must be performed by an operator who is appropriately trained and experienced.
Contact Person: Info
